Pesticide crusher: The following methods can be used to control the fineness of the pesticide crusher:

1. Adjust the speed of the crusher: The higher the speed of the crusher, the better the crushing effect, and the pesticides are finely ground. However, if the speed is too high, it may cause excessive machine load, damage the screen mesh, and reduce production efficiency. Therefore, it is necessary to adjust the speed reasonably according to actual needs.

2. Replace the sieve: The sieve is a key component that affects the fineness of the crusher. When the sieve is worn or blocked, it needs to be replaced in a timely manner. At the same time, selecting the appropriate sieve aperture can also control the fineness of the material through screening.

3. Adjusting the gap between the grate plates is an important factor affecting the fineness of the crusher. We can control the particle size of the material by adjusting the gap size of the grate plate. Usually, reducing the gap between the grates can result in finer powder particles.

4. In order to ensure the normal use of the crusher and sieve, regular cleaning and maintenance are necessary. If there are too many residues, it will affect the crushing effect and the filtering effect of the sieve. Therefore, regular cleaning and maintenance are very important.

5. When adjusting accuracy, we need to gradually test and check according to specific situations to ensure its effectiveness. After each adjustment, testing and inspection are required until the requirements are met.

It should be noted that different types of pesticides and processes have different requirements for the fineness of the crusher. Therefore, when regulating the pulverizer of pesticides, specific adjustments and operations need to be made according to the actual situation.